Summary

Maintenance

Details

Campbell CR1000X:

Pakbus: 20
SN: 18329

Anemometer has ferrite choke installed

Clock on Campbell CR1000X OK ~50 seconds fast
Time was set to UTC

Logger Running. Downloaded Data

Tipping Bucket funnel was clean

RAD-Met Enclosure:

Site has AC power but UPS is off and will not power back on.  Looking at data from disdro and MRR power failed on 18 Aug.

Dead UPS was removed from enclosure

Drove to Staples in Sonora and purchased new UPS.

Replaced with APC BVN650M1 UPS. Unfortunately, this UPS does not have USB communication with computer

MRR Service did not restart when computer booted after UPS was installed.

Rebooted computer and MRR Service started without issue.

Glued and screwed wood enclosure cover back together.

Next visit:

Replace enclosure cover screws with brass bolts or bring never-sieze.  SS bolts are starting to gall.  Replace UPS with unit that has UPS comms.